10HP 252m3/H Oil Free Claw Type Vacuum Pump

Product Details
Customization: Available
After-sales Service: Remote Support
Warranty: 1 Year
Manufacturer/Factory & Trading Company
Gold Member Since 2022

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
3
Year of Establishment
2014-09-12
  • 10HP 252m3/H Oil Free Claw Type Vacuum Pump
  • 10HP 252m3/H Oil Free Claw Type Vacuum Pump
  • 10HP 252m3/H Oil Free Claw Type Vacuum Pump
  • 10HP 252m3/H Oil Free Claw Type Vacuum Pump
  • 10HP 252m3/H Oil Free Claw Type Vacuum Pump
Find Similar Products
  • Overview
  • Product Description
  • Product Parameters
  • Our Advantages
  • Exhibition
  • Project Case
  • FAQ
Overview

Basic Info.

Model NO.
DCP70
Oil or Not
Oil Free
Structure
Claw Vacuum Pump
Exhauster Method
Negative Pressure Air Pump
Vacuum Degree
High Vacuum
Work Function
Mainsuction Pump
Working Conditions
Dry
Item
Water Cooled Vertical Dry Claw Vacuum Pump
Application Field
Chemicals, Pharmaceuticals etc.
Pumping Speed
70L/S(252m3/H)
Ultimate Vacuum
50PA/0.375torr/0.5mbar
1PA/0.0075torr/0.01mbar
7.5kw/10HP
Cooling Method
Water Cooled
Sealing Method
Mechanical Seal
Inlet Hole
DN80
Outlet Hole
DN50
Noise
About 78dB
Pump Body
Cast Iron
Transport Package
Plywood
Specification
L: 850MM, W: 700MM, H: 1645MM.
Trademark
AfaPa
Origin
Shanghai, China
HS Code
8414100090
Production Capacity
20 Sets/Year

Product Description

Product Description

10HP 252m3/H Oil Free Claw Type Vacuum Pump
DCP Vertical Dry Claw Vacuum Pump: 


DCP Vacuum Pump is a high cost-effective environmental protection vacuum pump by self-dependent innovation and develop,which base on numerous foreign vacuum pump.

10HP 252m3/H Oil Free Claw Type Vacuum Pump
10HP 252m3/H Oil Free Claw Type Vacuum Pump
Working Principle:
10HP 252m3/H Oil Free Claw Type Vacuum Pump
Dry Claw Vacuum Pump is variable volume vacuum pump, pumping vacuum by volume change from big to small, and small to big. When rotors locate at the initial position, S chamber volume get small, start suction air. When rotors start reverse running, S chamber get bigger, T chamber smaller. With rotors' running, S chamber get big, suction more and more air. T chamber get small, connect outlet hole, start exhaust. Rotors' running make T chamber get small, gas get maximum compression.S chamber get biggest, suction air get end.The vacuum space consist of two claw rotors and pump body get smaller and samller with driving by synchronous gear, gas exhaust and enter next stage,then another stage,still finall stage, or atmosphere, front end produce high vacuum. 

Applications:

Petroleum Industry: distilling, reduced pressure evaporating, vacuum drying, negative pressure concentrating, oil vapor recovery, adsorbtion/desorption, bio-fuel, inflammable gas, corrosive gas, chemical reaction absorption etc.

Pharmaceuticals Industry: crystallizing, distilling, subliming, drying, vacreation, polymerization, vacuum evaporation, negative pressure filtration, monomer recovery, adsorbtion/desorption, material conveying, corrosive medium, ethylene oxide disinfection etc.

Food Industry: subliming, drying, dewatering, vacuum evaporation, vacuum preservation, vacuum paskage etc.

Aeronautics & Astronautics: braze welding, vacuum coating, electron beam welding, wind tunnel test, space environment simulation etc.

Research Institutes: rotary evaporateion, distilling, rectification, polymerization, negative pressure extraction filtration, vacuum drying, pilot-plant, wind tunnel test, vacuum environment simulation etc.
 

Product Parameters
Model DCP50 DCP70 DCP110 DCP150 DCP200
Pumping Speed(L/S) 50 70 110 150 200
Max Vacuum(Pa) 50
Motor Power(Kw/Hp) 5.5/7.5 7.5/10 11/15 18.5/25 22/30
Rotating Speed(RPM) 3000
Working Voltage(V/HZ/P) 220-460/50/3 or 220-460/60/3
Structure Vertical
Inlet Hole DN80 DN100
Outlet Hole DN50 DN80
Cooling Method Water Cooled
Noise(dB) 78 80
Dimension(LxWxH,MM) 850x700x1466 850x700x1645 850x700x1684 850x700x1772 850x700x1836
Remark:
1L/S=3.6m3/h,1L/S=2.119CFM.
1Pa=0.01mbar,1Pa=0.001Kpa, 1Pa=0.0075Torr, 1Pa=0.000145PSI,1Pa=0.00001Bar.
 
Our Advantages

1. High ultimate vacuum, match with unit, can get better vacuum degree,
2. Low power consumption, fully start under atmospheric conditions,
3. Stronger adaptation, can pumping contain less dust and corrosive gas,
4. Good environmental protection, no industrial waster water,lower environmental protection cost.
5. Good seal, using magnetic drive seal, which can pumping radioactive substance,
6. High safety, contactless inner design, no friction,
7. Low maintain cost, with an average of 20,000 hours of trouble-free work,
8. Compact structure, small size, easy to install, 9. Solvent recovery, organic solvent recovery, maximum economic value, reduce emissions.

 
Exhibition

10HP 252m3/H Oil Free Claw Type Vacuum Pump

 
Project Case

10HP 252m3/H Oil Free Claw Type Vacuum Pump

 
FAQ

Q1: If I want to inquiry, what can I need to offer?
A1: Please tell us your Working Vacuum Degree(Pa,mbar or torr), Flowrate(L/S or M3/H) and Usage.

Q2: Do you have MOQ?
A2: 1Pcs is ok,if you have more quantity, the price will be cut down.

Q3: How long to delivery?
A3: We need about 4-5 weeks to produce,then extra need about 5-7 days to arrange domestic delivery and port clearence.

Q4: What is your payment term?
A4: 50% for prepayment, then the balance should paid before delivery, by TT.

Q5: How long for the warranty?
A5: 1 year for whole machine, the effective date of warranty should be counted from one month the goods arrived in client's site. If the pump go wrong, the client can choose back the pump to factory repair,or we offer remote technical support.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier